Repair a Sliding Glass Door Frame From Professionals: Don’t Hassle

Homeowners concerned with how to repair a sliding glass door frame can get timely help. The sliding glass doors of a patio is an attractive feature of any home and is much loved and used. Many homeowners attempt to undertake repairs in order to save on costly bills from professional work men.

In order to succeed with the process of how to repair a sliding glass door frame persons will have to learn how to remove the patio door panels. The sliding glass doors are most used for ease in accessing the patio for leisure time and party times. Sliding glass doors to the patio give the necessary privacy by shutting out the rest of the home. At party time it can give a private corner to guests or simply increase the floor space. Patio doors mostly have a single sliding panel and a fixed panel or both sliding panels. This can make removing them from their tracks a bit tricky. There are a few instructions simple to follow for people attempting remove the sliding glass doors.

Sliding glass door repair must take care of the trim of the door frames. The moving and stationary door panels will have to be removed one by one. Dealing with the trim will allow the door panels and their frames to come off fully. Since patio doors are usually large assistance through other persons is required in handling the removal of sliding glass doors. Large glass panels become quite heavy which becomes apparent when persons attempt to move them. The firsts step is to open the sliding panel. This is done by locating the positions of roller screws that are used to adjust the height of the frames in the tracks. These screws are loosened with a screwdriver in a counter – clockwise direction.

The sliding glass door frame repair will be possible only after the door panels are removed. In some case there is a head stop at the top of the door tracks. Secure this with one screwdriver before attempting to loosen adjustment screws. With a colleague or friend’s assistance lift the door panel towards the upper track and swing out the bottom towards self. Lower the panel outside the bottom track. This will free the panel from the upper track and enable the persons to move out the complete sliding glass doors panel. Since it is heavy this step should be undertaken carefully with necessary assistance.

The sliding glass door frame repair proceeds with following up with removing the brackets, fixed panel and the trim. There are L shaped brackets at the corner of fixed door panel and the tracks. A smaller screwdriver will be needed to remove the screws holding the panel and door together. Before removing the fixed panel, cut around the seam of the fixed panel and the door jamb to loosen caulk or paint holding the panel to the jamb. Use a flat pry bar to lift up the base of the fixed panel. It can be removed totally from the open position by moving it gently.

The repair person will have to lift up the trims to make the nail shafts visible. Use the hammer claws at the nail shafts to pull off the trim from all sides by detaching from the nails.

 DoorsWindowsRepairs provides detailed information on matters related to sliding glass door frame repair, windows doors replacement, window and door repair service, window and door repair costs, window door repair reports, windows and door repair estimates. It will also show you details on door and windows information and on other related matters.