Specialist Handymen for Window Replacement and Installation

Windows add architectural beauty to a household and contribute to the design of a house to a large extent. Windows with bad latches or bad springs or those that have broken panes look bad and reduce the resale value of the house, so replacing these windows becomes important. Window replacement and installation need to be taken place in the following conditions. 

• The problem of proper latching
• Broken screens or glass
• Wood decay
• If the windows look square
• For drip can installation
• For the installation of weep holes
• Window fogging caused due to moisture can be another reason.

However, door window replacement can be an expensive affair whatever the case may be, which is why a lot of home-owners prefer doing the replacement work themselves. The process of DIY or do it yourself window repair and installation is the same as the professional one, but it has a lot more uncertainty.  In order to make the self-window repair service work easy, here are a few important tips to guide you in this less expensive installation process.

Tips for New Home Window installation 

• Buy the right window- In stores, you would find windows on the shelves. These windows are typically windows that are used for newly constructed homes or for homes that have been completely remodeled. The windows that you need for replacement are known as the pocket windows, replacement windows or insert windows; these have no nailing fins and are easily able to fit into any frame.
• Measurement of the window space- Measurement of the window in the right way is quite important. The measurement of the width and the height has to be done in the following way.   

1. Width- To measure the width of the window, run the tape from one side to the other side of the window. The measurement has to be taken from inside of the window jamb. All measurements have to be the same, in case they do not then use the smallest measurement.
2. Height- The height has to be measured in the same way but by running the tape vertically. Again, the measurement has to be done from the inside and if the measurement differs then choose the smallest measurement. It is said to use the smallest measurement because then the window would fit in the opening and the gaps can be filled later on.

• Remove the window stops delicately- While removing the old window make sure you don’t damage the surroundings. Use proper tools such as a screwdriver, pry bar, delicacy and utility knife to do the work. Wood shims can also be used to protect the surroundings while using the pry bar.
• Carry a rough installation first- Before setting in the new window, try to fit in the window roughly to get an idea of how it looks.

So, if you are thinking of doing window restoration and repair all by yourself, then remember to follow these tips to carry on the repair process easily without having to face any difficulty. Visit DoorWindowRepairs.com